My Account
My Lists
My Orders
My Invoices
Track My Order
Stylish to stand out and sleek to blend in!
Designed from the ground up using sparkie’s and end user’s feedback, it’s stacked with features to make your life a breeze!
Featuring a roomy canopy, 7-year warranty, precision speed control, low noise and not just your average remote control.
Lights, Colour, Action!
Roomy canopy for easy install.
Designed to easily fit over the fan hanging bracket, receiver, and cables with plenty of wiggle room – heaps of sparkies asked for this! The canopy screws are cleverly hidden by the magnetic cover for a neat and easy install.
Super Quiet.
The super slow sleep mode creates just enough air movement to simulate an open window or a slight breeze throughout the night while remaining super quiet.
Intuitive Remote Control.
For ultimate ease of use, you’ll find dedicated buttons for hassle free dimming, tri-colour adjustment, on/off. Feedback resulted in the 1, 2 and 4 hour timers included.
Easily reverse the direction of the fan for Winter mode with the single press of a button.
All with 7-year warranty. Built to last.
You’re backed up with the Voltex 7-year parts and labour warranty on the entire fitting (motor, blades, receiver, LED driver – the lot!).
| Colours | Matte Black, Matte White |
| Motor wattage | 40W |
| Motor type | DC |
| Air delivery | 239㎥ /min on high - 74㎥ /min on low |
| Blades | 3 |
| Diameter | 52”/1320mm and 48"/1219mm |
| Blade material | ABS |
| Reverse mode | Yes (via remote) |
| Speed | High 220RPM – Low 71RPM |
| Remote | 5 speed (via remote) |
| Warranty | 7 years |
| Weight | 7kg |
| Maximum install angle | 15 degrees |
| Remote frequency | Nominal 434MHz |
| Depth from Ceiling | 298mm |
| Installation area | Indoor, Covered outdoor |
| Base diameter | 150mm |
Pairing a New Remote to the fan:
- Ensure Remote has batteries fitted & power to wall switch is on.
- Turn wall switch off for minimum 10 seconds.
- Turn wall switch back on- The fan should emit a short "beep" sound.
- Press & hold the "ON" button on the remote within 10 seconds of switching on & continue to hold until a double "beep" is heard.
- Release the "ON" button.
Remote should now be paired & old remote automatically unpaired.
