In-wall Delay-OFF Timer. 5m, 15m, 30m time delay. Connects to a fan or a lighting load (not both).

Description
Specifications
Download

When used with a momentary (bell press) switch mechanism – Press the switch, the connected load switches on. The load switches off automatically after the time out period (5, 15 or 30 minutes).

For use with a single load only, not a Light & Fan together.

When used with standard switch mechanism – Turn the switch on, the connected load turns on and stays on while the switch is on. When the switch is turned off, the load stays on for the time-out period (5, 15 or 30 minutes), then switches off automatically.

No Neutral connection required at the timer
For applications such as pantries, stairways, and storerooms, garages
Designed to be installed behind a wall plate (wall plate not supplied with the timer)
Delay can be set to 5, 15 or 30 minutes (15 minutes default)
Dimensions 39mm x 41mm x 12mm
7 Year Warranty
Maximum Load: 1A, Minimum Load: 2.5W (ok to run MC-25-240_ contactor).

Supply	220 – 240V, 50Hz
Max Load	1A (all load types)
Min Load	2.5W
Compatible Load Types	Resistive loads Inductive load (contactor coil) Tungsten filament lamp load Externally ballasted lamp load (LED, CFL or Fluorescent) Self-ballasted lamp load (LEDi or CFLi) Small motor load – M.1 (exhaust fan typical)
Timer Settings	5 minutes 15 minutes (default) 30 minutes
Switch Input type	Momentary push-button switch
Load Switching type	Semiconductor switching device
Dimensions	39 x 41 x 12 mm
Weight	20g
Ingress protection	IP30
Wire length	110 mm
Ambient Operating Temperature	0 to 50°C
Ambient Storage Temperature	-10 to 70°C
Humidity	0% to 95% RH non-condensing
Fault Protection	Open circuit Short circuit Overload Over temperature
Material	Flame retardant polycarbonate