360 degree,
16m detection
range
Easy to setup
The setup switches are conveniently located on the side of the sensor, under a simple to remove cover, making them easy to see and adjust when you are up on a ladder
Wall or
under-eave
mounting
The sensor head swivels, making it suitable for mounting on both vertical and horizontal surfaces
Two-part install
First fix – wire and attached the sensor base Second fix - push the sensor head onto the base, then attach with two screws
- 3-wire PIR motion sensor
- IP55 weather resistant design
- 360º detection angle with shield option
- Up to 16 metre radius detection distance at height of 2.5m
- For installation on walls and ceilings
- Easy installation: mount the base, and simply plug in sensor body
- Switching Capacity: MAXIMUM*- Resistive/Incadescent: 2300W; Inductive/Fluorescent/LED: 300W
- *A relay is required for loads approaching MAX value, and also if parallelling multiple sensor outputs.
- 5sec - 30min Time Delay
- Dusk to Dawn: 3-2000 Lux Adjustment, Lux learn mode option
- Watch function: Moving red LEDS provide a visual security deterrent
- Manual Override: Yes- 8 hours on by turning power switch OFF-ON twice (will revert back to AUTO at dawn)
- Corner mounting bracket option
- Operating Temperature: -20 to +40 ºC
- Standby Power Consumption: 0.5W
- 7 year warranty