Sensor Features:
- Dual Output relays (ideal for fan and light -with separate time adjustment dials)
- PIR Sensitivity adjustment
- Test function
- Improved terminals (compared to VMS-2)
- Ideal for small - medium room sizes
- Manual Override: No (will requre an external overide switch)
Rated voltage | 220-240Vac, 50/60Hz |
Output rating: Output 1 (T1) | Fluorescent or LED lighting: 300W Incandescent lighting: 1200W Halogen lighting: 850W |
Output rating: Output 2 (T2) | Resistive / Inductive loads: 3A @ 0.4 Power Factor, 12-250V ac 3A @ 5-30V dc Note Output T2 is not suitable for capacitive loads such as LED Lighting |
Manual Override | No (will requre an external overide switch) |
Environmental protection | IP23 from below, when installed |
Operating Temperature | -20°C to 45°C |
Detection range (across the sensor) | Approximately 3.5m radius / 7m diameter The detection range can vary depending on the ambient temperature The sensor is less sensitive when moving towards the sensor |
Field of view | 360° |
Suitable mounting height | 2.5m typical 4.0m maximum 1.7m minimum |
Sensor warm-up time (after power-up) | 60s The red LED illuminates during the warmup period |
Time adjustment Output 1 | 30s-1m-5m-10m-20m-30m-TEST |
Time adjustment Output 2 | 10s-1m-5m-10m-20m-30m-60m |
Light Level (Lux) Adjustment | 10-100-300-500-1000-2000 lux-Day Mode - Light Level operation is only linked to Output 1 - Output 2 operates regardless of light level - In TEST mode, Light Level setting is ignored on Output 1 |
Cut-out size | Ø 64mm-68mm |
Indicators |
The red LED illuminates during warmup period (after power up)
|